Table of Contents
Advertisement
Interfaces
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create the WWAN or select an existing WWAN:
To create a new WWAN, for Add interface, type a name for the WWAN and click .
n
To edit an existing WWAN, click to expand the WWAN.
n
New WWANs are enabled by default. To disable, click Enable.
5. For Interface type, select Modem.
6. The WWAN is enabled by default. Click Enable to disable, or to enable if it has been disabled.
TX54 User Guide
Wide Area Networks (WANs)
117
Advertisement
Table of Contents
