Digi TX54 User Manual page 752

Firewall
3. Click Network > Interfaces > LAN1.
4. For Zone, select External.
5. Click Apply to save the configuration and apply the change.

Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. At the config prompt, type:
(config)> network interface lan1 zone my_zone
(config)>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
TX54 User Guide
Firewall configuration
752