Table of Contents
Advertisement
Virtual Private Networks (VPN)
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > IPsec.
4. Create a new IPsec tunnel or select an existing one:
To create a new IPsec tunnel, see
n
To edit an existing IPsec tunnel, click to expand the appropriate tunnel.
n
5. After creating or selecting the IPsec tunnel, click Active recovery.
6. Enable active recovery.
7. For Restart interface, enable to configure the device to restart the interface when its
connection is considered to have failed. This is useful for interfaces that may regain
connectivity after restarting, such as a cellular modem.
TX54 User Guide
Configure an IPsec
tunnel.
IPsec
412
Advertisement
Table of Contents
