Table of Contents
Advertisement
Containers
Command line
1. Log into the TX54 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, type:
# lxc
NAME
UNPRIVILEGED
test_lxc RUNNING 0
fd00:2704::64bf:47ff:fe0a:d616 true
#
Schedule a script to run in the container
This simple example will:
1. Start the container in non-persistent mode.
2. Execute a ping command every ten seconds from inside the container.
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
TX54 User Guide
STATE
AUTOSTART GROUPS IPV4
-
Schedule a script to run in the container
IPV6
192.168.5.2
804
Advertisement
Table of Contents
