Digi TX54 User Manual page 305

Hotspot
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Create a new hotspot
4. During hotspot configuration, for Authentication mode, select RADIUS users .
5. Click to expand Radius.
a. For Primary server name, enter the IP address or fully-qualified domain name of the
primary RADIUS server to use to authenticate hotspot users.
b. (Optional) For Secondary server name, enter the IP address or fully-qualified domain
name of the backup RADIUS server to use to authenticate hotspot users if the primary
RADIUS server is not available.
c. (Optional) For Port, type the port number to use for RADIUS authentication requests. The
default is 1812.
d. (Optional) For Accounting port, type the port number to use for RADIUS accounting
requests. The default is 1813.
e. For Secret, enter the shared secret for the RADIUS server. This is configured on the RADIUS
server.
f. For NAS ID, enter the unique Network Access Server (NAS) identifier used by the
RADIUS server. The default is hotspot.
g. (Optional) Enable Swap Octets to swap the meaning of the input octets/packets and
output octets/packets RADIUS attributes. This can fix issues if the data limits and/or
accounting reports appear to be reversed on the RADIUS server. The default is disabled.
6. Click to expand Walled garden.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of the RADIUS server(s) that are being
used for authentication.
TX54 User Guide
or Enable hotspot using the default
Hotspot configuration
configuration.
305