Containers
Configure a container
Required configuration items
The following configuration options are completed automatically if Create Configuration was
n
selected when the container was created. See
Name of the container.
l
Enable the container.
l
Whether or not the container should use the device's system libraries.
l
Determine whether or not the device should including virtual networking capabilities.
n
Additional configuration items
If virtual networking is enabled:
n
The bridge to be used to provide network connectivity.
l
A static IP address for the container.
l
The network gateway.
l
Serial ports on the device that the container will have access to.
n
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > WiFi > Containers.
4. For Add Container, type the name of the container and click .
The Container configuration window is displayed.
TX54 User Guide
Upload a new LXC container
Configure a container
for details:
799