Test The Custom Container File - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

6. Tar and zip the directory structure to create a new container file:

$ tar -cvf sudo tar -cvf python_lxc.tgz rootfs

Test the custom container file

1. Add the new container to your TX54 device:

i. Log into the TX54 WebUI as a user with Admin access.

ii. From the main menu, click Status. Under Services, click Containers.

iii. Click Upload New Container.

iv. From your local file system, select the container file.

You can download a simple example container file, test_lxc.tgz, from the Digi website.

v. Create Configuration is selected by default. This will create a configuration on the

device for the container when it is installed. If deselected, you will need to create the

configuration manually.

vi. Click Apply.

2. Log into the TX54 command line as a user with shell access.

Depending on your device configuration, you may be presented with an Access selection

menu. Type shell to access the device shell.

3. At the shell prompt, type:

# lxc python_lxc

4. Execute the python command:

lxc # python /etc/test.py

Hello world.

TX54 User Guide

Create a custom container