Digi TX54 User Manual page 144

Interfaces
Task two: Create a new LAN
In this task, we will create a new LAN, named LAN2, to use the LAN2 bridge created in task one.

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. For Add Interface:, type LAN2 and click .
5. Configure the LAN2 LAN:
a. For Zone, select Internal.
b. For Device, select Bridge: LAN2.
c. Click to expand IPv4.
d. For Address, type 192.168.3.1/24.
e. Click to expand DHCP server.
f. Click Enable.
TX54 User Guide
Local Area Networks (LANs)
144