Digi TX54 User Manual page 931

Diagnostics
(config)> system log persistent true
(config)>
5. (Optional) To disable event categories, or to enable them if they have been disabled:
a. Use the question mark (?) to determine available event categories:
(config)> system log event ?
Event categories: Settings to enable individual event categories.
Additional Configuration
---------------------------------------------------------------------
----------
arping
config
dhcpserver
firmware
location
modem
netmon
network
openvpn
portal
remote
restart
serial
sms
speed
stat
user
wireless
wol
(config)> system log event
b. Depending on the event category, you can enable or disable informational events, status
events, and error events. Some categories also allow you to set the status interval, which
is the time interval between periodic status events. For example, to configure DHCP server
logging:
i. Use the question mark (?) to determine what events are available for DHCP server
logging configuration:
(config)> system log event dhcpserver ?
...
DHCP server: Settings for DHCP server events. Informational events
are generated
when a lease is obtained or released. Status events report the
current list of
leases.
TX54 User Guide
Configure options for the event and system logs
ARP ping
Configuration
DHCP server
Firmware
Location
Modem
Active recovery
Network interfaces
OpenVPN
Captive portal
Remote control
Restart
Serial
SMS commands
Speed
Network statistics
User
WiFi
Wake-On-LAN
931