Digi TX54 User Manual page 137

Hide thumbs Also See for TX54:
Table of Contents

Advertisement

Interfaces
(config network interface my_lan)> ipv6 ?
IPv6
Parameters
---------------------------------------------------------------------
----------
enable
metric
mgmt
mtu
prefix_id
prefix_length
type
weight
Additional Configuration
---------------------------------------------------------------------
----------
connection_monitor
dhcpv6_server
(config network interface my_lan)>
View default settings for the IPv6 DHCP server:
(config network interface my_lan)> ipv6 dhcpv6_server ?
DHCPv6 server: The DHCPv6 server settings for this network interface.
Parameters
---------------------------------------------------------------------
----------
enable
(config network interface my_lan)>
d. Modify any of the remaining default settings as appropriate. For example, to change the
minimum length of the prefix:
(config network interface my_lan)> ipv6 prefix_length 60
(config network interface my_lan)>
If the minimum length is not available, then a longer prefix will be used.
See
Configure WAN/WWAN priority and default route metrics
metrics.
(Optional) Configure the MAC address deny list.
Incoming packets will be dropped from any devices whose MAC addresses is included in the
MAC address denylist.
TX54 User Guide
Current Value
true
Enable
0
Metric
0
Management priority
1500
MTU
1
Prefix ID
48
Prefix length
prefix_delegation
Type
10
Weight
Active recovery
DHCPv6 server
Current Value
true
Enable
Local Area Networks (LANs)
for further information about
137

Advertisement

Table of Contents
loading

Table of Contents