Table of Contents
Advertisement
User authentication
Two-factor authentication information for user login over SSH, telnet, and the serial console:
n
The verification type for two-factor authentication: Either time-based or counter-based.
l
The security key.
l
Whether to allow passcode reuse (time based verification only).
l
The passcode refresh interval (time based verification only).
l
The valid code window size.
l
The login limit.
l
The login limit period.
l
One-time use eight-digit emergency scratch codes.
l
To configure a local user:
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
4. In Add User, type a name for the user and click .
The user configuration window is displayed.
TX54 User Guide
Local users
704
Advertisement
Table of Contents
