MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide
4.3.1 (Optional) Installing a Digital Temperature and
Humidity Sensor
Procedure
Step 1 Attach the digital temperature and humidity sensor to the side panel of the
cabinet.
Figure 4-4 Installing a digital temperature and humidity sensor
Step 2 Connect the communications cable for the digital temperature and humidity
sensor to the COM port on the communications expansion module or UIM.
Figure 4-5 Installing a communications cable for a digital temperature and
humidity sensor
Step 3 Set the DIP address.
Issue 01 (2021-05-30)
NO TE
There is a magnet at the bottom of the digital temperature and humidity sensor, which can
be directly attached to the cabinet.
NO TE
The communications cables in the figures are connected to UIM.
Copyright © Huawei Technologies Co., Ltd.
4 Installing Components
26