Cleaning; Air Intake Filter Removal And Cleaning; Figure 5-6: Air Intake Filter Removal - Pacific Power Source ADF Series Operation Manual

5.11 Cleaning

BEFORE you clean the unit, switch the unit off at the front panel breaker AND remove all mains
power using the mains disconnect.
• Please do NOT use any organic solvent capable of changing the nature of the plastic
such as benzene or acetone.
Please ensure that no liquid is allowed to penetrate this product.
•
AVANT de nettoyer l'appareil, mettez l'appareil hors tension au niveau du disjoncteur de face
avant ET retirez tout cable d´alimentation secteur.
• Ne pas utiliser de solvant organique capable de changer la nature de la matière plastique
tel que le benzène ou l'acétone.
Veiller à ce qu'aucun liquide ne pénètre à l´intérieur de l´appareil
•
To clean this product, use a soft or slightly damp cloth.

5.12 Air Intake Filter Removal and Cleaning

Units equipped with a removable air intake filter must have their filter material cleaned on a
regular basis. A six-month cleaning interval is recommended. For units deployed in
particularly dirty environments, this cleaning interval should be shortened to three months
or less to prevent the air filter from clogging up with dirt. This applies to both Master units
and Auxiliary units.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
CAUTION
ATTENTION

Figure 5-6: Air Intake Filter Removal

ADF SERIES® OPERATION MANUAL
SECTION 5: UNPACKING AND INSTALLATION
Page 49 of 349