Pacific Power Source ADF Series Operation Manual page 256

Query Command
Description
Returned Data Format
Returned Data
Query Example
8.10.2.2 SOURce:SYNChronize[:OUTput]
Command Syntax
Description
Query Format
Returned Data Format
Returned Data
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
SOURce:SYNChronize[:Input]:STATe?
This query only command returns the status of the Phase Lock Loop
(PLL). A "0" response indicates the PLL has not locked on to the sync
input yet. A 1 response indicates the PLL is locked.
<b>
0 = PLL is not locked
1 = PLL is locked
SOUR:SYNC:STAT?
1
SOURce:SYNChronize:OUTput
This command enables the SYNC output
SOURce:SYNChronize:OUTput?
<b>
0 = SYNC output off
1 = SYNCoutput on
SOUR:SYNC:OUT?
1
ADF SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 256 of 349