Pacific Power Source ADF Series Operation Manual page 177

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
MEASure:LOGger:FILEName <cr>
Sets the data logging file name
Filename between double quotes
<cr>
MEAS:LOG:FILEN "Measurement-AC"
MEASure:LOGger:FILEName?
<cr>
MEAS:LOG:FILEN?
Measurement-AC
MEASure:LOGger:MEMory <cr>
Select the memory where the logging files will be saved. By default it
is RAM unless a memory stick or USB drive was inserted and selected
with this command:
MEAS:LOG:MEM:CAT? can be used to get the available memories.
Memory name between double quotes.
<cr>
MEAS:LOG:MEM "USBA"
MEASure:LOGger:MEMory?
<cr>
MEAS:LOG:MEM?
USBA
MEASure:LOGger:MEMory:CATalog?
Returns the catalog of available memory names.
<cr>
MEAS:LOG:MEM:CAT?
RAM, USBA
MEASure:LOGger:RATE
Sets the frequency at which the logging process will take
measurements.
Frequency in Hz. Range is 1 Hz through 10 Hz.
<nr1>
MEAS:LOG:RATE 5
MEASure:LOGger:RATE?
<nr1>
MEAS:LOG:RATE?
5
ADF SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 177 of 349