Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
MEASure:LOGger:TIMEstamp <cr>
Sets the time stamp format that will be attached to every
measurement record in the measurement log file.
< DATE | 0 | TIME | 1 | ALL | 2 >
<cr>
MEAS:LOG:TIME ALL
MEASure:LOGger:TIMEstamp?
<nr1>
MEAS:LOG:TIME?
2
ADF SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 178 of 349