Pacific Power Source ADF Series Operation Manual page 160

7.3.13.3 Analog Outputs
Analog outputs allow external equipment to monitor power source output values using an
analog DC output signal. The assignment of measurement functions to each of four
available outputs can be configured from the front panel.
Available settings are:
• CHANNEL
• OUTPUT VOLTAGE
• MEASUREMENT
• RANGE
• GAIN
• OFFSET

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
Rear Panel, Connectors and Protection
SECTION 7:
[ 1 | 2 | 3 | 4 ]
Output setting
Select measurement to be assigned to output
0.0000 to 5.000 V
0.000 to 1000
– 1000 to +1000
ADF SERIES™ OPERATION MANUAL
Page 160 of 349