Pacific Power Source ADF Series Operation Manual page 205

Commands available only with Option V:
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
[SOURce:]VOLTage:EXTend
This command grants access to a higher voltage range extension
mode. When enabled, AC voltage settings up to 333V L-N are
supported.
[ 0 | OFF | 1 | 2 ]
0 = Off, 312Vac max.
1 = 320Vac max
2 = 333Vac max
<bool>
VOLT:EXT 1
[SOURce:]VOLTage:EXTend?
<nr1>
VOLT:EXT?
1
ADF SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 205 of 349