Ramp Time & Slew Rate - Pacific Power Source ADF Series Operation Manual

10.9.3 Ramp Time & Slew Rate
The Slew Rate screen has entries for all available programmable slew rate settings. This includes
Voltage AC and Frequency. Note that both are mutually exclusive as they would conflict with
each other. To use programmable slew rates, the RAMP TIME must be disabled.
Slew Rates can be set for Voltage AC and Frequency.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
ADF SERIES™ OPERATION MANUAL
LAN Interface Configuration
SECTION 10:
Page 298 of 349