Execution Commands - Pacific Power Source ADF Series Operation Manual

8.6.2

Execution Commands

The following commands may be used to control stored program executions.
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Description
Parameter Format
Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
PROGram[:SELected]:EXECute [<nr1> [,<cr>]
This command executes the selected program (default) or the
program number passed as the first parameter.
Option: PROGRAM NUMBER [,<nr1>]
Option: MEMORY [,<cr>]– Available are: INTERNAL | RAM | USB
[<nr1> [,<cr>]
PROG:EXEC 2
PROGram[:SELected]:EXECute ?
The query format returns the number of the program that is in effect.
<nr1>
PROG:EXEC?
23
ADF SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 191 of 349