Parallel System Commands - Pacific Power Source ADF Series Operation Manual

8.9.5

Parallel System Commands

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
SYSTem:DISCOVERY
Initiates discovery of the number of paralleled power sources
None
n/a
SYST:DISCOVERY
SYSTem:PARALLELUNITS?
Returns the number of power sources found.
<nr1>
SYST:PARALLELUNITS?
1
SYSTem:PARALLELUNITS:EXPEcted
Sets the number of power sources that should be connected to the
system interface bus.
1 – 200
<nr1>
SYST:PARALLELUNITS:EXPE 4
SYSTem:PARALLELUNITS:EXPEcted?
<nr1>
SYST:PARALLELUNITS:EXPE?
4
ADF SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 229 of 349