Pacific Power Source ADF Series Operation Manual page 341

Error Source Code
Front panel 520
Front panel 521
Front panel 522
Front panel 523
Front panel 524
Front panel 525
Front panel 526
Front panel 527
Front panel 528
Front panel 529
Front panel 530
Front panel 531
Front panel 532
Front panel 533
Front panel 534
Front panel 535
Front panel 536
Front panel 537
Front panel 539
Front panel 540
Front panel 541

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
Category Error Message
Error Inductive impedance not
available in UPC
compatible mode.
Error Read only file or folder.
Error Argument requires more
decimals.
Warning Warning: Ambient
temperature approaching
limit.
Error Digital I/Os interface
conflict: Serial interface is
active.
Error New IO firmware
available. Must split
system in two to perform
update.
Error Cannot export
configurations.
Error Cannot import
configurations.
Error Version mismatch error.
Error Internal connection error
with the power stage.
Error Fault during output
enable.
Error Incorrect password.
Warning Frontpanel firmware
image model do not
match frontpanel model.
Error This setpoint is being set
by an analog input.
Error Image model not
compatible.
Error Frontpanel not
compatible.
Error Cannot convert cycle
based transient to time
based.
Error Cannot load pulse.
Error Parameter below
minimum saturation.
Error Parameter below
minimum range.
Error Parameter below
minimum unit scope.
ADF SERIES™ OPERATION MANUAL
Service and Maintenance
SECTION 13:
Possible Cause Resolution
Page 341 of 349