Table 6-8: Available Unit Configuration 1 Screen Soft Keys - Pacific Power Source ADF Series Operation Manual

Access to other utility screens is available from the UNIT CONFIGURATION screen through
the soft keys. The table below lists the available soft keys on the UNIT CONFIGURATION
screen.
SOFT KEY
User Limits (SK1)
Ramp & Slew (SK3)
Program Memory (SK2)
CSC Config. (SK4)
Next Screen (SK5)

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
of the installed output transformers.
Note: In either coupled mode, only AC voltage
programming is possible.
Description
Displays SETUP MENU screen. Refer to section 6.7.2
Displays SLEW RATE MENU screen. Refer to section 6.7.3
Displays PROGRAM MEMORY screen. Refer to section 6.7.4
Display CSC setting screen
Toggle to alternate UNIT CONFIGURATION screen

Table 6-8: Available UNIT CONFIGURATION 1 screen soft keys

ADF SERIES™ OPERATION MANUAL
Front Panel Operation
SECTION 6:
Page 108 of 349