Power Measurement Commands; Other Measurement Commands - Pacific Power Source ADF Series Operation Manual

Commands available only with Option D:
Query Format
Description
Returned Data Format
Query Example
8.4.4

Power Measurement Commands

Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
8.4.5

Other Measurement Commands

Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
MEASure:CURRent:DC#?
Returns the measured DC current for the selected phase #. If no
phase number is specified, returns the reading for all phases.
<nr2>
MEAS:CURR:DC1?
0.0000
MEASure:POWer#?
Returns the true power for the selected phase # in kW. If no phase
number is specified, returns the reading for the last selected phase.
<nr2>
MEAS:POWer1?
4.4203
MEASure:KVA#?
Returns the true apparent for the selected phase # in kVA. If no
phase number is specified, returns the reading for the last selected
phase.
<nr2>
MEAS:KVA1?
4.8665
MEASure:PF#?
Returns the true apparent for the selected phase # in kVA. If no
phase number is specified, returns the reading for the last selected
phase.
<nr2>
MEAS:PF1?
0.9083
MEASure:TEMPerature:AMBient?
Returns the ambient temperature of the power source in degrees
celcius.
<nr1>
MEAS:TEMP:AMB?
24
ADF SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 174 of 349