Ieee488.2 Common Commands; Table 8-2: Mandatory Ieee488.2 Common Commands - Pacific Power Source ADF Series Operation Manual

8.11 IEEE488.2 Common Commands

The following IEEE488.2 common commands (a.k.a. star commands) are supported by the
AC power source. These commands are provided for compatibility with the IEEE488.2
standard. They are aliases to the relevant proprietary command and can be used
interchangeably. Commands are shown in alphabetical order.
IEEE488.2 Command
*CLS
*DCL
*ESE <n>
*ESE?
*ESR?
*GTL
*IDN?
*LLO
*OPC
*OPC?
*RST
*SRE
*SRE?
*STB?
*TRG
*WAI
Command Syntax
Description
Command Syntax
Description
Parameters
Parameter Format

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
Description
Clear Status
Device Clear
Event Status Register Enable
ESE Query
Event Status Register Query
Goto Local
Identify
Local Lock Out
Operation Complete
OPC Status Query
Reset
Service Request Enable
SRE Query
Status Byte Query
Trigger
Wait

Table 8-2: Mandatory IEEE488.2 Common Commands

*CLS
Clear Status. The Clear Status (CLS) command clears the status byte
by emptying the error queue and clearing all the event registers
including the Data Questionable Event Register, the Standard Event
Status Register, the Standard Operation Status Register and any
other registers that are summarized in the status byte.
*DCL
Device Clear. Resets the instrument to a default state.
None
n/a
ADF SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Group
Status and Event
Internal Operations
Status and Event
Status and Event
Status and Event
Control
System Data
Control
Synchronization
Synchronization
Internal Operations
Status and Event
Status and Event
Status and Event
Synchronization
Synchronization
Mandatory
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page 263 of 349