Table of Contents
Advertisement
[ESC+KS] Kanji Set
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying Kanji set.
[Format]
<KS>a
-
Parameter
a [Kanji Set] = Refer to [Initial Value and Valid Rangef of Parameter ] section blow.
[Coding Example]
Specifying GB18030
<A>
<KS>3
<Z>
[Supplementary Explanation]
-
Select the kanji set to be printed by using 16 x 16 dots horizontal writing kanji <K1> command,
24 x 24 dots horizontal writing <K2> command, 16 x 16 dots vertical writing kanji <k1>
command and 24 x 24 dots vertical dots <k2> command.
-
An appropriate Kanji code should be specified when switching the Kanji Set. If the right code is
not specified, the print may fail. Refer to Kanji Code <KC>.
[Initial Value and Valid Range of Parameter]
Initial value
1
ESC
<1B>
16
a=1
When the power is OFF
Valid range within items
Valid range between items
1: Japanese, JIS208 Kanji (JISX208)
3: Chinese, Simplified Chinese characters (GB18030)
5: Chinese, Traditional Chinese characters (BIG5)
KS
<4B>
<53>
16
16
The set parameter is maintained.
The set parameter is valid until the next specification is
made.
The set parameter is valid until the next specification is
made.
Valid range
75
Parameter
a
Advertisement
Table of Contents
