Table of Contents
Advertisement
[ESC+BJF] Memory Card Initialization
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the format (initialization) of memory card.
[Format]
<BJF>aaaaaaaa
-
Parameter
a [User ID] = Specifying up to 8 bytes in alphanumeric and symbols.
[Coding Example]
<A>
<CC>1
<BJF>satocard
<Z>
[Supplementary Explanation]
-
Specify slot number registered with Card Slot for Use <CC> prior to this command <BJF> by all
means.
-
This command <BJF> is for formatting a memory card; therefore, it cannot be used in
combination with other commands.
-
The card will not be formatted and error occurs when the memory card is write-protect. The data
is not guaranteed when the memory card is formatted accidentally. Be careful when formatting
the memory card.
-
Initialization takes time. Do not send any command until the initialization finishes.
-
When SD card is selected by the Card slot for Use <CC> and the SD card is formatted, the
contents of the SD card are deleted all and then the printer creates folders necessary.
[Notes]
-
Do not power off this product when accessing to the memory. When this product is turned off
while memory accessing, the data in the accessed media may be corrupted.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
BJF
<42>
<4A>
<46>
16
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
334
Parameter
aaaaaaaa
Advertisement
Table of Contents
