Table of Contents
Advertisement
[Points]
-
With the highlighting function the character width enlarges proportional with the expansion
factor.
-
Using the highlighting function, depending on the type of font, characters become squeezed.
-
This command is not available for JIS code print data.
-
For the half size character (1-byte character code), printing will be performed in W16 x H32
dots.
-
For the full size character (2-byte character code), printing will be performed in W32 x H32 dots.
-
When the Kanji mode setting is [China, Simplified Chinese (GB18030)] or [China, Traditional
Chinese (BIG5)], it will be a command error.
[Notes]
-
When half-sized character with voiced/P-sound consonant mark is specified, each part of
character appears as a single character.
e.g.) When the word "ﾊﾞｰ" is specified, it will be written separately such as " ﾊ ", " ﾞ ", " ｰ ".
[Valid Commands]
Print Position
<V>
Modification
<P>
<H>
<L>
<%>
<&>
</>
<0>
144
<WD>
Advertisement
Table of Contents
