Table of Contents
Advertisement
[ESC+~] Multiple Cut
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifies the number of labels to print between each cut.
[Format]
<~>aaaa
-
Parameter
a [Number of prints before cutting] = Valid Range : 0 to 9999
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XM>ABC
<Q>4
<~>2
<Z>
2 pcs
[Supplementary Explanation]
-
Valid only for Cutter models.
-
If this command is not specified in Cutter mode, each label will be cut off after printed.
-
In case the parameter "a" is set to 0, no label will be cut.
-
The product of Qty and value of "aaaa" shall not exceed the maximum number "999999."
-
This command <~> shall be put after Qty<Q>. <Q>, in this case, is to specify number of sheets
to be cut.
ESC
<1B>
16
aaaa=1
When the power is OFF
Valid range within items
Valid range between items
Cut
Cut
4 pcs
Feed direction
~
<7E>
16
The set parameter is not maintained.
The set parameter is valid until the next specification is
made.
The set parameter becomes initial value at the next item
<A>.
Cut
310
Parameter
aaaa
Cut
Advertisement
Table of Contents
