Table of Contents
Advertisement
[Supplementary Explanation]
-
Specify the card slot number used for Card Slot <CC> prior to this command.
-
Specify registered data only.
-
To change the registered content, clear it with Clear <*> to re-register.
-
Graphic Call <GR> is for printing out the data registered with Registration of Graphic <GI>.
-
When data is not registered properly, print error may occur.
For details of data format, refer to Print of Graphic <G>.
-
The error occurs when specifying unused or specifying the slot which this product is allocated.
[Notes]
-
Do not power off this product when accessing to the memory. When this product is turned off
while memory accessing, the data in the accessed media may be corrupted.
[Specified Range]
Maximum byte in horizontal direction: 252
Maximum byte in vertical direction: 600
348
Advertisement
Table of Contents
