-
This will become invalid when specifying protocols not supported in the used interfaces.
-
When the protocol is changed, the printer needs to be rebooted. Without rebooting, data
communication may be incorrect.
Status 5 Reply Check Command
This is a command to set the check function of BCC and item No. in the status 5 return.
[Command]
ESC (HEX 1BH) + CR
[Format]
<CR>a,b
-
Parameter
a [BCC check]
0: BCC check disable (initial value)
1: BCC check enable
b [Item number check]
0: Item No. check disable (initial value)
1: Item No. check enable
[Example]
<A>
<ID>*****
<CR>1,1
<Z>
[Supplementary Explanation]
-
Do not include this command to print data (<A>-<Z>).
History Data Recuest Command
Upon receive of this command, this product will send 500 history data to the host.
[Command]
ESC (HEX 01H) + LW
[Format]
STX + SOH + LW + ETX
[Example]
STX OH LW ETX
[Return Status Format]
427