Table of Contents
Advertisement
[Supplementary Explanation]
-
When the value outside of the range is specified for sectional number, it will be processed as
"0." (This will not be a command error.)
-
When the value outside of the range is specified for the designation of pattern, it will be
processed as "0." (This will not be a command error.)
-
Even when the print start position exceeds the printing area, the printing is performed. (This will
be a command error.)
-
This command sets the base reference point to the center of a circle.
0,0
<H>200
-
This command can be registered to the format.
-
If setting the grid line wider, it will be widened inward.
-
Head check is performed using the entire graphic area as a print area.
<V>200
100 in radius
40
Advertisement
Table of Contents
