Table of Contents
Advertisement
[ESC+BT] Barcode Ratio Registration
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the ratio of the narrow bar in regard to the wide bar.
[Format]
<BT>abbccddee
-
Parameter
a [Barcode type]
0: CODABAR(NW-7)
1: CODE39
2: ITF
5: Industrial 2of5
6: Matrix 2of5 (Coop2of5, NEC2of5)
b [Narrow space] = Valid range : 01 to 99 dots
c [Wide space] = Valid range : 01 to 99 dots
d [Narrow bar] = Valid range : 01 to 99 dots
e [Wide bar] = Valid range : 01 to 99 dots
[Coding Example]
Barcode type: CODE39, Narrow space: 03, Wide space: 05, Narrow bar: 03, Wide bar: 05
<A>
<BT>103050305
<V>100<H>200<BW>01233*ABCD*
<Q>2
<Z>
[Supplementary Explanation]
-
To print barcode with specified ratio, insert Barcode print by specified ratio <BW> after this
command.
-
When <BW> and the Print Quantity <Q> command are not specified, only the registration of bar
width ratio of narrow and wide bars will be performed.
-
Only one ratio can be registered.
-
If the data other than specified is set, this will not be registered due to command error.
-
Matrix 2of5 will be expressed as Coop2of5/NEC2of5.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
BT
<42>
<54>
16
16
The set parameter is not maintained.
The set parameter is valid until the next specification is
made.
The set parameter is valid until the next specification is
made.
181
Parameter
abbccddee
Advertisement
Table of Contents
