Table of Contents
Advertisement
ERROR
DETECTION
*1 Print quantity may not be set properly depending on timing of edit and analysis.
Cancel Request Command
This command enables to cancel print jobs and to clear the entire contents of receive buffer.
The status of this product after finishing process is returned.
* When the cancel request command has been sent, wait more than 500 ms before sending the next data.
* Please do not send CAN (Cancel request command) while STX <A> to <Z> ETX. CAN (Cancel request command) would
not be sent properly.
1. Command CAN (HEX 18H)
2. Return status list
Return Status
ACK (HEX 06H)
NAK (HEX 15H)
Print Command
This command (<A> to <Z>) starts the printing process.
The status of this product after receiving command is returned.
1. Return status list
interface
Return Status
ACK (HEX 06H)
NAK (HEX 15H)
Contents
PRINT HALT (NO ERROR)
ANALYZING /
NO ERROR
EDITING
RIBBON NEAR END
BUFFER NEAR FULL
RIBBON NEAR END & BUFFER NEAR FULL
PRINT HALT (NO ERROR)
HEAD OPEN
PAPER END
RIBBON END
MEDIA ERROR (PRINT ERROR)
SENSOR ERROR
HEAD ERROR
CARD ERROR
CUTTER ERROR
OTHER ERRORS
No error in this product
Error in this product
No error in this product
Error in this product
416
*1
*1
*1
*1
Contents
Contents
ASCII
HEX
Q
51
S
53
T
54
U
55
V
56
*1
W
57
b
62
c
63
d
64
e
65
f
66
g
67
i
69
j
6A
k
6B
Advertisement
Table of Contents
