Table of Contents
Advertisement
[ESC+B] Barcode (Ratio 1:3)
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying a barcode with a ratio of 1:3 between narrow bar and wide bar.
[Format]
<B>abbcccn...n
-
Parameter
a [Barcode type] = Refer to table below
b [Narrow bar width] = Valid range : 01 to 12 dots
c [Barcode height] = Valid range : 001 to 999 dots
n [Print data] = Data
Barcode types (Ratio of module composition may not be available depending on the barcode.)
a
Barcode type
0
CODABAR(NW-7)
1
CODE39
2
ITF
3
JAN/EAN13
4
JAN/EAN8
5
Industrial 2of5
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
Set print data including Start/Stop character.
Start/Stop characters are [A, B, C, D, E, N, T, a, b, c, d, e, n, t].
Note that scan result of the characters [E, N, T, a, b, c, d, e, n, t]
is [D, B, A, A, B, C, D, D, B, A].
e.g.) When barcode print data is [123], specify [A123A].
Barcode character pitch becomes enabled.
For print data, refer to the CODABAR (NW-7) code table.
Set print data including Start/Stop character.
Start/Stop Character is [*].
e.g.) When barcode print data is [12345], specify [*12345*].
Barcode character pitch becomes enabled.
For print data, refer to the CODE39 code table.
Specify print data in even-numbered digit.
If specifying in odd-numbered digit, add "0" to the head of print
data.
For print data, refer to the ITF code table.
This barcode has no guard bars and no human-readable
characters.
For print data, refer to the JAN/EAN13 code table.
This barcode has no guard bars and no human-readable
characters.
For print data, refer to the JAN/EAN8 code table.
Barcode character pitch becomes enabled.
For print data, refer to the Industrial 2of5 code table.
B
<42>
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Descriotion
170
Parameter
abbcccn...n
Ratio
1:3
1:3
1:3
Fixed
(11, 12, 13
digits)
Fixed
(7, 8 digits)
1:3
Advertisement
Table of Contents
