SATO SG112 ex Programming Reference Manual page 306

[ESC+A1] Media Size
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying media size.
[Format]
<A1>aaaabbbb (a, b fixed) *Media size is less than 9999.
<A1>VaaaaaHbbbb (a, b variable)
- Parameter
a [Height of label] = Valid range: Refer to [Valid range] section below.
b [Width of label] = Valid range: Refer to [Valid range] section below.
[Valid Range]
Width of label: 1500 to 3200 dots
Height of label: 360 to 5040 dots
[Coding Example]
<A>
<A1>12001800
<Z>
[Supplementary Explanation]
- If using the label smaller than the head width, use this command for specifying the media size
and adjust the start point position corresponding to the media size.
- For specifying the media size, include the size of backing paper.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
A1
<41> <31>
16 16
The set parameter is not maintained.
The set parameter is valid until the next specification is
made.
The set parameter is valid until the next specification is
made.
305
Parameter
aaaabbbb
VaaaaaHbbbb