[ESC+WK] Job Name
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying job name for status return.
[Format]
<WK>aaaaaaaaaaaaaaaa
-
Parameter
a [Job Name] = ASCII code 16-digit, Shift JIS Kanji 8-digit
[Coding Example]
Job name: SATO
<A>
<ID>01
<WK>SATO
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<Q>2
<Z>
[Supplementary Explanation]
-
When Status4 is used for interface protocol, specified job name can be set to the telegraphic
status.
-
Status can be confirmed by sending status request (ENQ).
-
Include this command within items and use between Start Code <A> and Stop Code <Z>.
-
This command can be used in combination with Job ID Number <ID>.
[Points]
-
In status return interface protocol, this command becomes valid when status request (ENQ) is
received while printing (QTY≠0, includes at the time of Offline and Error).
-
In status return communication protocol, if status request (ENQ) is received when printing is not
in progress (QTY=0, No received data when power is ON), space (20H) will be set to status and
returned.
-
When Job name <WK> is used more than twice within the items of Start Code <A> and Stop
Code <Z>, the last specified value becomes valid.
-
For more information, refer to the "Interface Specifications."
ESC
<1B>
16
aaaaaaaaaaaaaaaa=<20>
When the power is OFF
Valid range within items
Valid range between items
WK
<57>
<4B>
16
16
16
The set parameter is not maintained.
The set parameter is valid until the next specification is
made.
The set parameter becomes invalid.
25
Parameter
aaaaaaaaaaaaaaaa