[ESC+~B] Eject and Cut
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying eject and cut operation.
[Format]
<~B>
[Coding Example]
<A>
<~B>
<Z>
(1) Label stop position
A: Printed
B: Not printed
C: Not printed
D: Not printed
(2) Command received
(3) Label is fed to the cut position.
(4) Label is cut off.
(5) Label is back fed to the print position.
[Supplementary Explanation]
-
Valid only for Cutter models.
-
This command is used to cut the last label remaining in the printer.
-
This command <~B> should be used by differentiating between Start Code <A> and Stop Code
<Z>.
-
This command <~B> may not be used in combination with other commands.
-
This command <~B> is valid when the printer still holds the label which is not cut after being
printed.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
~B
<7E>
<42>
16
16
The set command is not maintained.
The set command becomes invalid.
The set command becomes invalid.
Feed direction
312
Parameter
None
(1)
(2)
(3)
(4)
(5)