Table of Contents
Advertisement
[ESC+k8] 16 x 16 dots Kanji in Vertical Line with 1-byte
Character
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying 16 x 16 (width x height) dots vertical written Kanji character print and W8 x H16 dots half
size character in horizontal line.
[Format]
<k8>an...n
-
Parameter
a [Kanji selection mode]
H: HEX characters
B: Binary code
I: HEX characters, smoothing function
C: Binary code, smoothing function
J: HEX characters, highlighting function
D: Binary code, highlighting function
K: HEX characters, smoothing and highlighting function
E: Binary code, smoothing and highlighting function
n [Data] = Print data. Refer to Kanji code (ESC+KC) command for the available character codes.
[Coding Example]
Shift JIS HEX characters, Data: 株式会社ｻﾄ-
<A>
<KC>1
<V>100<H>200<P>2<L>0305
<k8>H8A948EAE89EF8ED0BBC4B0
<Q>2
<Z>
[Supplementary Explanation]
-
HEX characters = Kanji Code 4 bytes ASCII / 1 Kanji character
-
Binary code = Kanji Code 2 bytes / 1 Kanji character
-
Smoothing function validity range = Horizontal/vertical valid range: factor 3 to 12
-
Highlighting function validity range = Horizontal/vertical valid range: factor 1 to 5
-
Unicode data includes control codes. To print correct codes, specify HEX character in Kanji
mode.
-
Use GB18030 for Simplified Chinese (Unicode cannot be used).
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
k8
<6B>
<38>
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
137
Parameter
an...n
Advertisement
Table of Contents
