Table of Contents
Advertisement
FTP protocol complies with RFC959. FTP protocol handles the list of theoretical printer names as a
transfer directory, and file transfer to this directory executes print operation. Note that it is possible to
specify ASCII (A) and BINARY (I) and TENEX (L8) as transfer mode, and mode varies by the client.
Banner page can be printed according to the settings.
The cue name has 3 names: lp, sjis, euc
Cue name
lp
sjis
euc
* Multiple sessions cannot be established at the same time.
TELNET
TELNET complies with RFC854. Operations are done by interactive menu. Changing and referring
internal settings and displaying status are available. You need to log in as a "root" user and enter
password to change the settings. Initial setting of root password is only line feed.
<TELNET command example>
Enter [TELNET xxx.xxx.xxx.xxx (IP address)] from the MS-DOS command prompt, and
enter user name and password, then following message will appear.
SATO PRINTER Model Name TELNET server.
Copyright 2010(C) SATO Corporation.
login:root
'root' user needs password to login.
password:
User 'root' logged in.
No. Item
--------------------------------------------------
1 : Setup TCP/IP
2 : Disply status
99 : EXIT setup
Please select(1-99)?
* Model name this product is displayed in [Model Name].
* Please refer to "Setting/Display items" described later for the setting of [1: Setup TCP/IP].
Setting/Display Items
Following chart lists configurable and referable sections and variables.
TCP/IP-related setting
Variable name
IP address
Subnet mask
Gateway address
RARP protocol
x
○
○
Value
(level.1)
Setting range
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
ENABLE/DISABLE
495
Kanji filter
N/A
Shift-JIS
EUC
Initial value (Factory setting)
192.168.1.1
255.255.255.0 (calculated from the IP
address)
0.0.0.0
DISABLE
Kanji code
Advertisement
Table of Contents
