Table of Contents
Advertisement
Software Specifications
Supported protocol: TCP/IP
Network layer: ARP, RARP, IP, ICMP
Session layer: TCP, UDP
Application layer: LPD, FTP, TELNET, BOOTP, DHCP, HTTP, SNMP, SNTP
1. LPR, FTP and Dedicated Socket protocol of TCP/IP can be used for sending print data.
2. Status of product can be obtained by dedicated Socket protocol.
Specifications of TCP/IP
TCP/IP protocol environment has LPD and FTP for printing, and TELNET for setting each variables.
BOOTP/DHCP can be used for setting address.
For WindowsXP, Windows Vista, Windows7, Windows Server2003, Windows Server2008, Windows
Server2008R2, IP address and other options can be set by using the printer setup tool on the
Accessory CD-ROM. Please refer to the Network Utility section in the CD-ROM for the printer setup
tool.
For Socket communication, "Printer Driver" and "Printer Status Monitor" in CD-ROM can be used
for sending print data and monitoring printer status. However multiple concurrent sessions are not
allowed. Please refer to the description in each section of the CD-ROM for "Printer Driver" and
"Printer Status Monitor."
LPD
LPD protocol complies with RFC1179 and handles a list of theoretical printer names as queue name.
The cue name has 3 names: lp, sjis, euc
Cue name
lp
sjis
euc
Send sequence of data file and control file in the job does not affect on print operation when the job
is sent by LPR.
* Job deletion is not supported by LPR.
* LPD specification is only available in Status4 (Driver protocol).
* Missing label or duplicated image may occur when many labels are printed by LPR due to the specifications of Windows.
* Banner page print is not supported.
Specifications of FTP
Kanji filter
x
○
○
494
Kanji code
N/A
Shift-JIS
EUC
Advertisement
Table of Contents
