[ESC+IM] Displayed Messages
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying messages to be displayed while the printer is online, normal mode.
Alphanumeric and symbols can be specified. The maximum 16 digits can be specified.
[Format]
<IM>a(,bbb...b)
-
Parameter
a [Switching of display/no display]
0 : No display
1 : Display on the upper row
2 : Display on the lower row
b [Displayed message]
Valid range: Alphanumeric and symbols (20H-7EH of ASCII) 16 digits
This parameter can be omitted for no display.
[Coding Example 1]
Change the display of the upper row
<A>
<IM>1,FORMAT01
[Print data]
<Q>100
<Z>
Before the command
ONLINE
QTY:000000
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
After the command
FORMAT01
QTY:000000
IM
<49>
<4D>
16
16
The set parameter is not maintained.
The set parameter is valid until the next specification is
made.
The set parameter is valid until the next specification is
made.
374
Parameter
a(,bbb...b)