Table of Contents
Advertisement
[ESC+Q] Print Quantity
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the number of labels to print.
[Format]
<Q>aaaaaa
-
Parameter
a [Number of labels to print] = Valid range: 1 to 999999
[Coding Example]
Number of labels: 2
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
-
Print contents specified by Start Code <A> and Stop Code <Z> are regarded as 1 label, and the
number of reprints can be specified.
-
Use this command prior to Stop Code <Z>.
[Points]
-
Reprint will be performed based on the specified print quantity. If specifying Sequential Number
<F>, the value of sequential number that was set up for that field portion will be printed.
-
When this command is used in combination with Multiple Cut <~>, the specified print quantity
multiplied by specified value for cutting becomes the number of labels to print.
ESC
<1B>
16
aaaaaa=1
When the power is OFF
Valid range within items
Valid range between items
Q
<51>
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
23
Parameter
aaaaaa
Advertisement
Table of Contents
