Table of Contents
Advertisement
[ESC+&R] Form Overlay Call
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Invoking the contents in memory card with Registration of Form Overlay <&S>.
[Format]
<&R>,aa
-
Parameter
a [Registration Number] = Valid range: 1 to 99
[Coding Example]
<A>
<CC>1
<&R>,1
<Z>
[Supplementary Explanation]
-
Specify slot number registered with Card Slot for Use <CC> prior to this command <&R> by all
means.
-
This command can be combined with different registration No. and printed.
-
When registration No. is not specified, this command will be ignored.
-
If specifying unregistered No., Read/Write error will occur.
-
When registering without specifying window, Vertical Print Position <V> and Horizontal Print
Position <H> will be ignored and V1 and H1 (Start position of drawing area) will be determined.
-
When specifying and registering window, movement with <V> and <H> will be enabled.
Note that when exceeding print area, the portion outside of print area will not be printed.
-
Please note that this command cannot be used without a memory card.
[Notes]
-
Do not power off this product when accessing to the memory. When this product is turned off
while memory accessing, the data in the accessed media may be corrupted.
[Valid Commands]
Print position
<V>
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
<H>
&R
<26>
<52>
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
339
Parameter
,aa
Advertisement
Table of Contents
