Reissuing EXT Signal
Following signal types are available in the Intelligent mode.
Type
TYPE Ⅰ
TYPE Ⅱ
TYPE Ⅲ
TYPE Ⅳ
Reissuing EXT Signal
Set "Enable/Disable" in the Intelligent mode.
Enable: Reprint the same content
Disable: No reprint
Print end signal (PREND) is "High" before printing labels. The signal level is
"Low" after the completion of print. The signal level will be "High" 20 ms later.
Print end signal (PREND) is "Low" before printing labels. The signal level is
"High" after the completion of print. The signal level will be "Low" 20 ms later.
Print end signal (PREND) is "High" before printing labels. The signal level is
"Low" from the start to the end of print and will be "High" after the completion
of print.
Print end signal (PREND) is "Low" before printing labels. The signal level is
"High" from the start to the end of print and will be "Low" after the completion
of print.
508
Operation