SATO SG112 ex Programming Reference Manual page 44

[ESC+(] Reverse Color Print
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying black and white reverse print.
[Format]
<(>aaaa,bbbbb
- Parameter
a [Specification of reverse area in horizontal direction]
Valid range: Refer to [Valid Range] section below.
b [Specification of reverse area in vertical direction]
Valid range: Refer to [Valid Range] section below.
[Coding Example]
Reverse area in horizontal direction: 200, Reverse area in vertical direction: 70
<A>
<V>50<H>50<P>2<L>0202<XM>ABC
<V>50<H>50<(>200,70
<Q>2
<Z>
H50 (dots)
V50 (dots)
[Supplementary Explanation]
- Set this command next after the firm data string to be inversed. If it is set prior to the firm data
the data will be printed in black without inverse.
- To set print start position, specify Horizontal Print Position <H> and Vertical Print Position <V>
prior to this command.
- When the print start position exceeds the printing area, printing will not be performed due to
command error.
[Points]
- For setting, keep the black print area under 30% of overall label.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
70 (dots)
200 (dots)
(
<28>
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
43
Parameter
aaaa,bbbbb