[ESC+&S] Form Overlay Registration
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the registration of fixed print contents to a memory card.
[Format]
<&S>,aa(,bbbb,ccccc)
-
Parameter
a [Registration No.] = Valid range: 1 to 99
b [Size specification of window width]
Valid range: Refer to [Valid Range] section below (omissible).
c [Size specification of window height]
Valid range: Refer to [Valid Range] section below (omissible).
[Coding Example]
<A>
<V>100<H>100<XS>MODEL
<CC>1
<&S>,1
<Z>
[Supplementary Explanation]
-
Specify slot No. with Card Slot for Use <CC> prior to this command <&S> by all means.
-
Delimit Start of Data Transmission <A> and End of Data Transmission <Z> with the format to be
registered.
-
Registration of identical registration No. is invalid.
-
Both Print of Graphic <G> and Print of BMP File <GM> can be registered.
-
This command <&S> allows up to 99 registries. Note that the capacity of registry may vary
depending on the memory card to be used.
-
Data registered with this command <&S> can be cleared with Clear <*>R.
-
If the vertical size of the window is larger than the set paper length, a command error occurs.
[Notes]
-
Do not power off this product when accessing to the memory. When this product is turned off
while memory accessing, the data in the accessed media may be corrupted.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items;
&S
<26>
<53>
16
16
The registered data become valid.
The registered data is valid until the next specification is
made.
The registered data is valid until the next specification is
made.
336
Parameter
,aa(,bbbb,ccccc)