Table of Contents
Advertisement
[ESC+#F] Print Darkness
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying print darkness.
[Format]
<#F>ab
<#F>aab
-
Parameter
a [Print darkness level specification]
1 ↑ Lightest
2
3
4
5
6
7
8
9
10 ↓ Darkest
b [Print darkness specification]
A to F (omissible)
This parameter is usually "A."
The parameter valid range differs depending on the model.
Refer to [Print darkness range] section below.
[Coding Example]
<A>
<#F>5A
<Z>
[Supplementary Explanation]
-
Print darkness value specified by the command or "Settings" mode is maintained.
[Notes]
-
If the value over valid range is specified, command error will occur and print darkness will not be
changed.
-
Initial value can be set by default setting operation of this product.
ESC
<1B>
16
Refer to [Print darkness level range] and [Print darkness range] section below.
When the power is OFF
Valid range within items
Valid range between items
#F
<23>
<46>
16
16
The set parameter is maintained.
The set parameter is valid until the next specification is
made.
The set parameter is valid until the next specification is
made.
303
Parameter
ab or aab
Advertisement
Table of Contents
