Table of Contents
Advertisement
I/O signal
1) Input Signal
Item
Print start
(PRIN)
Reprint
(PRIN2)
Print
Print end
(PREND)
Print start
(PRIN)
Reprint
(PRIN2)
Print
Print end
(PREND)
[Supplementary Explanation]
-
Keep "Low" for print start signal (PRIN) until print end signal (PREND) is output.
Make sure to output 10 ms or more for reprint signal (PRIN2).
Printer will not reprint if reprint signal cannot be detected from 10 ms and under.
-
When print start signal and reprint signal is emitted at the same time, print start signal is
enabled and reprints.
-
The reprint signal is valid from the point of print completion (QTY=0) until the next print data is
received. This product will not reprint other than that time.
Input waveform
1
2
3
4
More than 10mses
1
2
3
4
1st label complete
1st label complete
510
20msec
20msec
Advertisement
Table of Contents
