Table of Contents
Advertisement
Memory Card Commands
[ESC+CC] Card Slot for Use
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the slot number for use.
This product can access to the media registered to the specified slot.
[Format]
<CC>a
-
Parameter
a [Slot number]
0 : Slot 0 (Initial value: Product's memory)
1 : Slot 1 (Initial value: FROM)
2 : Slot 2 (Initial value: SD card)
[Coding Example]
<A>
<CC>1
<GI>H003003001FF000000 ～ 000000FF
<Z>
[Supplementary Explanation]
-
It is necessary to specify when accessing to "Product's memory" and "FROM."
-
Specifying the unused slot becomes command error.
-
Please confirm that the media is mounted when specifying "SD card."
The command error occurs when the printer accessed to the slot when the media is not
mounted.
[Notes]
-
Do not power off this product when accessing to the memory. When this product is turned off
while memory accessing, the data in the accessed media may be corrupted.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
CC
<43>
<43>
16
16
The set parameter is not maintained.
The set parameter is valid until the next specification is
made.
The set parameter is valid until the next specification is
made.
333
Parameter
a
Advertisement
Table of Contents
